Detra Lab Denmark
Save the environment - dont print

Download full Brochure V1.9
[ 2.1mb PDF format ]

Download your guide to Detra-Lab furniture storage solutions

Download Technical Data Sheets V1.9 only
[ 600kb PDF format ]

Download Detra-Lab Technical Data Sheets only
Construction Skills Certificate Scheme
Tel: 01261 851 978    |    Email:

Detra Lab Laboratory Furniture Systems

Detra Lab - Laboratory Furniture Support

Detra-Lab is supported by Detra-Set, a heavy duty vertical rail and bracket system that results in unlimited and precise height adjustment for all combinations of laboratory worktops, storage cabinets and shelving.

Laboratory Furniture Support The anodised aluminium uprights are provided in Single Channel (Code 604) or Double Channel (Code 6044) configurations. Countersunk fixing holes are prepunched at 250mm centres. Light grey PVC end caps fit into and close off the exposed ends of the upright.

Once the uprights are fitted to the wall or modular service spine, the Detra-Set support bracket can be fitted. The heel of the bracket mates with the numbered fixing holes in the upright and provides +/- 25mm adjustment along the whole length.

An anodised aluminium slide is fitted to the support bracket. The slide provides the necessary fixing to the underside of the worktop, wall cupboard or shelf.

For recommended support bracket and slide size see Furniture Specifications.

The Detra-Set support system requiries chemical anchor fixing to a solid floor structure - Hilti or Expandet anchors are generally employed.

The minimum requirement for fixing of wall arrangements is double thickness plasterboard.

Detra-Set has been independently performance tested by The Jydsk Institute of Technology. Standard load capacity is 80 kilos per bracket. Maximum load is 110 kilos.

Detra Lab Laboratory Furniture Support